Replacement burner receptacle used for some GE, Hotpoint, and Kenmore range models.
Directly Replaces: WB17T10006, WB17T10009, WB17K10003, WB17T10001, WB17X10007, RR106, 1038747, AH783534, AP3203326, EA783534, EAP783534, PD00001097, PS783534.
- Socket that the burner elements plug in to connect your burner to the cooktop.
- Bakelite range block.
- Includes two different style mounting clips.
- Includes (1) Range Block with Female Contacts, (2) Mounting Clips, (2) 60" Wire Leads, Instructions.
- Color: Black / Purple.
- Material: Plastic / Metal.
- Block Dimensions: 1-7/8"L x 1-3/8"W x 13/16"H.
- Additional Dimensions: Wire Leads measure 60"L.
- View Instructions.
Failure Symptoms: Poor operation of burner, no operation of burner or a sizzling noise under the burner/cooktop.
How to test: Look at the receptacle contacts with a flashlight. If the terminals look burnt you will need to replace the element receptacle.
Also make sure the element prongs are clean and not burnt. If the prongs are burnt bad the element will need to be replaced as well.
Repair Tip: Make sure your unit is getting enough power. If the electric range is receiving less than the required 220 volts of alternating current, the surface element will not work.
Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and Thrifty Appliance Parts LLC, cannot be held liable for results obtained or arising from use or reliance on such information.
The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.
Very nice product. Great price. The shipping was more than the part. To ease installation, i cut and spliced the wires with wire nuts. Perfect fit and operation.