Replacement door seal and locking switch / strike kit used for some Crosley, Frigidaire, Kenmore, and White-Westinghouse washer models.
Directly Replaces: 131763202, 131763256, 131763255, 1312694, 131269400, 131763200, 131763245, 3626240, PA66-GF25, 08003223, 5301317632, K001317632, K1317630-K938, K1317632, WH10X27534 WH10X10003, WH10X10007, WH10X27194, LP3202, 4547432, 4547033, AH2367737, AH3418879, AP6327625, AP4455026, AP4694680, AP6285657, EA3418879, EAP2367737, PD00038657, PD00070219, PS12343346, PS2367737, PS3418879, PS12364048, 131763310, 134456600, 1032664, 131763300, LP3310, AP3580441, AH890617, EA890617, PD00000164, PS890617, B00DM8K1UG, 134515300, 134365200, 134551400, 134740900, 134741400, 5304450475, 1156861, AH1148773, AP3869103, EA1148773, EAP1148773, PD00000224, P134551400, PS1148773.
Features:
- Boot seal prevents leaks by forming a seal between the wash tub and the door; Switch and strike work together to keep the door closed while the unit is in use.
- Used on front loading washers.
- Switch as 8 terminals.
- Includes (1) Boot Seal, (2) Spacers, Instructions, (1) Front Loading Door Lock and Switch Assembly, (1) Door Strike.
APN131763202 Door Lock/Latch Specifications:
- Color: Gray / Red.
- Material: Plastic / Metal.
- Finish: Matte.
- Electrical Specs: 120VAC, 50/60Hz.
- Dimensions: 4-1/2"L x 3-7/8"W x 1-1/2"H.
APN131763310 Door Strike Specifications:
- Color: White.
- Material: Plastic.
- Finish: Matte.
- Dimensions: 1-1/4"L x 9/16"W x 2-9/16"H.
- Additional Dimensions: Approx. 2" between mounting holes (center to center).
APN134515300 Boot Seal Specifications:
- Color: Gray.
- Material: Rubber.
- Finish: Matte.
- Dimensions: 18-1/2"L x 5"W x 18-1/2"H.
- Additional Dimensions: Spacers measure approx. 4 3/4"L.
- View Instructions.
Compatible Models:
Don't see your model listed? Submit this form to get help finding the right part.
The door lock and strike kit is used on front loading machines to hold the door closed while the unit is running.
Failure Symptoms: When the door lock or strike is damaged or defective the door may not latch properly, preventing the door from locking. This could also prevent the unit from being able to start.
How to Test: The door lock and strike assembly can fail mechanically or electrically. To check if it a mechanical error inspect the lock and switch assembly for damage and see if it is latching properly. To check for an electrical error, use a multi-meter to test the switches for electrical continuity. If there is damage to the strike or no continuity to the switch, they should be replaced.
*Continuity is the presence of a complete path for current flow. A continuity test is a quick check to see if a circuit is open or closed. Only a closed, complete circuit (one that is switched ON) has continuity.
*Continuity testing should be attempted only when voltage is NOT present in the circuit being tested. Always unplug the device or turn off the main circuit breaker before attempting a continuity test. Ensure that all capacitors are safely discharged.
Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and Thrifty Appliance Parts LLC, cannot be held liable for results obtained or arising from use or reliance on such information.
The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.
