Replacement complete heating element assembly with housing, thermostat, and fuse used for some Amana, Kenmore, Maytag, and Samsung dryer models.
Directly Replaces: DC97-14486A, DC97-14486D, DC97-08891A, DE486A, 1795935, AP4342351, EAP2432265, PD00002003, PS2432265.
Features:
- Produces heat while the dryer is in operation.
- Fully assembled in a metal housing, with replacement DC47-00018A hi-limit thermostat and replacement DC96-00887A thermal fuse.
- Includes (1) Heater Assembly with Housing, L260-50 Hi-Limit Thermostat, and Fuse.
Specifications:
- Material: Metal / Ceramic.
- Electrical Specs: 240V, 5300W.
- Overall Dimensions: 20-1/4"L x 7"W x 5-1/4"H.
Compatible Models:
Don't see your model listed? Submit this form to get help finding the right part.
Repair Skill Level: 2 | Beginner to Moderate
Minimal disassembly (if any) and some basic tools may be needed.
Part Description: The heating assembly produces heat while the dryer is in operation.
Failure Symptoms: Dryer overheats, will not heat at all, or takes an increasing amount of time to dry your clothes.
Testing: Check for damage or breaks in the element coil. Use a multimeter to test it for continuity. If there is damage to the coil or if heating element does not have continuity, replace it.
Bonus Tip: The thermal fuse and high limit thermostat should also be checked for failure, as they may also be affected.
Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and Thrifty Appliance Parts LLC, cannot be held liable for results obtained or arising from use or reliance on such information.
The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.
