Replacement heating element and wire set used for some Estate, Kenmore, Roper and Whirlpool dryer models.
Directly Replaces: WP4391960, WP4391960VP, 4391960, 2013, 8218, 279218, 279247, 279248, 279410, 279411, 279455, 279478, 279598, 279698, 337378, 337430, 339655, 340468, 348774, 348775, 349542, 349543, 349545, 349546, 660933, 660965, 660982, 685182, 685942, 689805, 689980, 690241, 690983, 691724, 692758, 693061, 693062, 693295, 693297, 693298, 693299, 693300, 695182, 696324, 696326, 696579, 697290, 786077, 4391960, 8700-599, DE177, DE193, DE195, DE698, ER4391960, TJ90DE698, 279457, 3367, AP6009347, EAP11742505, PD00002385, PS11742505.
Features:
- Produces heat while the dryer is in operation.
- Insulators and restring already attached for easy installation.
- Comes with (2) replacement 279457 adapter wire and connector kits.
- Must re-use the housing from the old heating element.
- Includes (1) Heater Coil Assembly, (2) Adapter Wires, (2) Wire Connectors, Instructions.
Specifications:
- Material: Metal / Ceramic / Plastic.
- Electrical Specs: 240V, 5200W.
- Overall Dimensions: 17-1/2"L x 5"W x 3-1/8"H.
- View Instructions
Compatible Models:
Don't see your model listed? Submit this form to get help finding the right part.
Repair Skill Level: 2 | Beginner to Moderate
Minimal disassembly (if any) and some basic tools may be needed.
Part Description: The heating assembly produces heat while the dryer is in operation.
Failure Symptoms: Dryer overheats, will not heat at all, or takes an increasing amount of time to dry your clothes.
Testing: Check for damage or breaks in the element coil. Use a multimeter to test it for continuity. If there is damage to the coil or if heating element does not have continuity, replace it.
Bonus Tip: The thermal fuse and high limit thermostat should also be checked for failure, as they may also be affected.
Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and Thrifty Appliance Parts LLC, cannot be held liable for results obtained or arising from use or reliance on such information.
The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.
-
Different Design but FITS!
The in-laws' circa 1976 Kenmore dryer stopped heating. The element was burned out because the link collector had a half-inch coating. The original element is a different design - it looks like a small toaster, boxy with flat stainless ribbons. Several merchant sites indicated this model as the replacement, and Thrifty had the best price by far so I gave it a try. This replacement unit is longer and extends further into the metal duct but other dimensions are fine. One small mounting screw hole aligns with one hole in the duct and holds it quite securely. It was a simple quick inexpensive fix, and now they clean the lint collector weekly.
-
Excellent customer serv
The first item I received had a problem, e-mailed them, had new one shipped on Sat received Monday. Working great after a few adjustments.
-
kenmore dryer heating element.
Thank you the item arrived on the date posted and I installed it the next day...
-
exact fit
thanks for the fast shipping 2 days . got the part and it was exact a good fit and heats like new...thank you
