Replacement temperature sensor used for some Frigidaire and Kenmore oven models.
Directly Replaces: 316217008, 316233900, 316233902, 316233903, 4929364, AP6888260 EAP12724046, PD00052458, PS12724046.
- Senses and sends the oven temp reading to the control board.
- Connector could be different than original. If so cut and splice wires together with porcelain wire connectors.
- Includes (1) Sensor Probe with 2-Wire Harness Assembly.
- Color: White / Gray.
- Material: Metal / Plastic.
- Probe Dimensions: 4-1/4"L x 1-3/4"W x 3/4"H. Approx. 1" between mounting holes (center to center).
- Additional Dimensions: Harness and plug measure 3"L.
Don't see your model listed? Submit this form to get help finding the right part.
Failure Symptoms: Uneven baking / Lack of temperature control.
How to test: The sensor can be tested by using a multimeter. As temperature rises, the resistance measurement also rises. Oven temperature problems can be caused by other things, but this is one of the more common causes.
Repair Tip: The oven sensor varies its resistance to electrical current as the temperature varies. If the oven doesn't bake evenly, the oven sensor resistance might be incorrect.
For small variations, you may be able to re-calibrate the resistance with the control board. Check the owners manual for directions on how to do this on your model.
Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and Thrifty Appliance Parts LLC, cannot be held liable for results obtained or arising from use or reliance on such information.
The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.
Was very impressed with the help finding the right part I needed.
Oven seems to be holding the right temperature. Only baked brownies to try it out and they were fine. Service was very good.